How to Wash Your Car At Home: Step-by-Step Guide

Tired of dropping cash on car washes only to have your ride look like it got caught in a tumbleweed storm? Sick of all the scratches and swirls that seem to appear out of nowhere? Time to ditch the wash-and-dry hustle and roll up your sleeves with some car soap. Don’t worry, we’ve got your back!

This guide will break down the car washing basics and throw in some pro-tips so you can stop binge-watching TV and start giving your car the TLC it deserves. Get ready to swap your couch for a water bucket and sponge!

Prepare Your Gear

First, you're going to need some supplies to build your car washing kit.

Every loving car owner should own the following:

Preparation Before the Wash

Wash your car in the shade if you don't want your soap to turn into an ugly water spot party. Direct sunlight is a total mood killer for your car's shine, making those suds dry up way too fast.

And hey, if you’re a planet-saver or live in a drought zone, try washing on absorbent surfaces or go for waterless car wash products. Mother Earth will thank you, and you’ll still get that sparkle without wasting gallons of H2O.

Step 1: Pre-Rinse the Car

Pre-Rinsing Car

Grab a hose with a nozzle or a pressure washer for cars and give your car a good spray-down to blast away all that loose dirt and debris.

Don't just hit the easy spots—give some extra love to the wheel wells and undercarriage, because that's where grime likes to throw its wild parties. Skipping this pre-rinse is like inviting a scratch-fest on your paint job. Trust us, your car will thank you for the thorough scrub-down

Step 2: Start with the Wheels

Spraying wheels clean

Start with the car wheels—they're basically the car’s dirty little secret. Grab a separate bucket just for these filthy bad boys. Slather on some wheel cleaner and go to town with a wheel brush, digging into those grime-filled crevices like a pro.

Once you've given them a proper scrub, rinse them thoroughly. Trust us, clean wheels make the rest of the car look like a million bucks.

Read More:

Step 3: Remove Tough Residue

Removing bugs and tar

If you’ve got stubborn bug splatter or tree sap still clinging on for dear life, don’t sweat it. Just apply our bug and tar remover to the affected area(s). Let it rest for a bit, then rinse and wash that area like you normally would.

If it’s still a pain, give it a second-day spot wash with the remover to make sure it’s gone for good.

Step 4: Prepare the Two Bucket Wash Method

Two Chemical Guys Buckets Being Filled

With those wheels looking fresh, let’s get the rest of the car gleaming using the two-bucket method.

First, fill both buckets with water—one will be your rinse bucket and the other your wash bucket. Pop a Dirt Trap wash screen at the bottom of each bucket to catch all that nasty dirt and debris.

Now, squirt 1 - 3 oz of your favorite Chemical Guys car soap into one of the buckets. Make sure it’s a pH-balanced shampoo to keep your paint job in top shape.

Use the first water bucket for your soapy solution and wash mitt, and keep the second bucket for rinsing out the mitt. This way, you're not just spreading grime around—you’re actually cleaning and protecting your ride.

Step 5: Wash the Car Body using the Two Bucket Method

Soak your wash mitt in the soapy water and start applying it to your car’s surface. Remember, straight lines only—no circular motions, or you’ll end up with a swirl-tastic mess.

Work from the top down, because gravity’s got your back in sending dirt downward. This way, you won’t just re-grime the areas you’ve already cleaned.

After tackling a panel or two, it’s time for a mitt refresh. Dunk the dirty mitt in the rinse bucket to get rid of the grime.

Give it a good scrub against the dirt trap to flush out all that nasty stuff through the cyclone funnels, trapping it beneath the screen.

Then, wring out the mitt on the ground to release any loose dirt particles before diving back into the soapy bucket for another round on your ride.

Step 6: Rinse The Car Thoroughly

Rinsing car thoroughly

Once you’ve washed the whole car, grab the hose and give it a thorough rinse. Make sure all that soap is completely washed away—don’t leave any sudsy surprises behind.

Pay extra attention to those tight spots where soap loves to hide, because nobody wants a car soap residue encore.

Step 7: Dry the Car

Drying the car with a drying towel

Grab some clean microfiber towels or a chamois and dry your car—air drying is a recipe for water spots. Use long, sweeping motions that follow the curves of your ride for a perfect finish.

*If you didn't rinse thoroughly with pressurized water and suspect tiny debris might still be on the surface, blot dry with a microfiber towel or use a blower to avoid scratches and swirls.

No missed areas or water spots are allowed!

Step 8: Treat Special Areas

Clean Wheel and Tire

Once you’ve dried off your car, don’t forget those special spots:

For the tires, apply some tire dressing if you’re into that shiny look, but keep it away from the treads—no one wants a slick surprise on the road.

Clean your windows with glass cleaner to achieve that crystal-clear, streak-free finish. Your ride deserves to shine from every angle!

Read More:

Car Washing Pro Tips

Use a Foam Cannon

A foam cannon is your secret weapon for a super sudsy wash. It blasts a thick layer of foam that clings to your car’s surface, giving you extra lubrication to lift dirt off the paint before you even touch it with a mitt. It's like giving your ride a frothy spa treatment

Avoid Water Spots When Washing Your Car

These steps will help keep your car free from water spots and looking great!

  • Dry Quickly: Use clean microfiber towels or chamois immediately after rinsing.
  • Dry in Long Strokes: Use long, sweeping motions to avoid streaks.
  • Work in Sections: Dry one section thoroughly to prevent water spots.
  • Use a Drying Aid: Apply a drying aid or quick detailer to help prevent spots.
  • Wash in the Shade: Avoid drying in direct sunlight to prevent fast evaporation.

Utilize the Two-Towel Drying Method

Once you’ve scrubbed away the grime, grab two microfiber towels for the drying dance. First, use one towel to soak up the bulk of the water—give it a good scrub. Then, switch to the second towel to buff away any sneaky leftover moisture. This one-two punch will keep your car streak-free and water-spot-free, because your ride deserves nothing less than a flawless finish!

Dry Hard-to-Reach Areas with Compressed Air

Grab a compressed air blower to tackle those tricky spots like mirrors, grills, and emblems. Blast away the water from these tight spaces to dodge water spots and streaks. It’s like giving your car a high-tech air dry—because even the hard-to-reach spots deserve some love!

Apply a Final Rinse with Deionized Water

For the ultimate finish, use deionized water for your final rinse if you can. This magic water is free from minerals and impurities, so you get a spotless shine without having to dry. It’s like giving your car a rinse with pure, spot-free perfection!

Clay Bar After Every Wash

Give your car’s paint a spa day with a clay bar after each wash. It’ll zap away bonded contaminants and leave your paint as smooth as silk, primed and prepped for polishing, waxing, or sealing. Think of it as the ultimate prep step for a show-worthy shine!

Read More: How to Clay Bar Your Car to Decontaminate Paint

Apply Quick Detailer Between Washes

Spritz on a quick detailer spray between washes to keep your ride looking freshly cleaned and shiny. It adds a layer of protection and wipes away light dirt and fingerprints, because who doesn’t want their car to look like it just rolled out of a showroom every day?

Maintain Your Microfiber Towels

Wash and dry your microfiber towels after each use to keep them soft and ready for action. Skip the fabric softeners and let them air dry—your towels will stay in tip-top shape, ready to tackle any grime that comes their way!

Use a Boar’s Hair Brush for Delicate Areas

For those delicate spots like emblems, badges, and intricate trim, reach for a soft boar’s hair brush. It’s gentle enough to avoid scratches but tough on dirt and grime, making it your go-to tool for precision cleaning!

Check Your Work Under Different Lighting

After washing and drying, check out your car under all kinds of lighting—sunlight, shade, and artificial light. It’s like a final inspection to catch any sneaky spots or imperfections. Because who doesn’t want their ride looking flawless from every angle?

Special Car Washing Considerations

Washing Cars with Matte or Satin Finishes

When washing vehicles with matte or satin finishes, use soaps designed just for these surfaces. They won’t add any unwanted gloss or shine. During the wash, steer clear of polishing or rubbing that could mess with the matte look. Stick to gentle, even strokes with a soft mitt to keep that sleek finish intact

Washing Ceramic-Coated Vehicles

Got a ceramic-coated car? Then ditch the harsh soaps and go pH-neutral or risk turning that fancy coating into a sad, scratched mess. Use soft microfiber mitts and be gentle—no need for heavy scrubbing like you’re battling grime on a rusty old bucket. Treat it like a delicate diva; after all, it’s got a coating that’s too cool for harsh scrubs!

Washing Cars with Convertible Tops

Got a car with a convertible top? Go easy with a gentle stream of water—no fire hoses, please. You don’t want to turn your top into a leaky mess. Swap out your regular car wash soap for a convertible top cleaner to keep that fabric or vinyl clean and protected. Treat your top with the TLC it deserves, or it might just start raining inside your car!

Read More:

Washing Classic or Vintage Cars

Cleaning a classic or vintage ride? Skip the power washer and stick to hand washing with a low-pressure hose—don’t stress those old seals or fragile paint. Opt for a mild car wash soap to pamper that delicate, possibly aging finish. Treat it like the precious antique it is, or you might end up with a car that looks more ‘vintage’ than you planned!

Washing Vehicles with Vinyl Wraps

Got a vehicle with a vinyl wrap? Ditch the high-pressure water—don’t make those edges peel up like a bad sticker job. Stick with a standard hose or low-pressure wash and use a car wash soap that’s vinyl-friendly. Otherwise, you might end up with a wrap that’s more disaster than design!

Washing Off-Road or Heavily Soiled Vehicles

Got an off-road ride covered in mud? Start with a thorough pre-soak to loosen up that heavy grime and keep your paint from getting scratched. When it’s wash time, use a pressure washer on a lower setting to tackle the stubborn dirt, but don’t blast away at those sensitive seals—you don’t want to turn your ride into a leaky mess!

Read More:

Washing Cars with Aftermarket Modifications

Got aftermarket decals or body kits? Skip the high-pressure water directly on those mods—no one wants a decal lifting off like a bad sticker job. Wash gently around the edges to keep everything intact and looking sharp. Treat those mods with care, or you might end up with a ‘custom’ look you didn’t plan for!

Washing Black or Dark-Colored Cars

Washing black or dark-colored cars? Prepare for a swirl mark battle. Use high-quality, soft microfiber mitts and tackle the job in small sections. Rinse often—dark paint shows every bit of soap or dirt that’s allowed to dry. Keep it fresh and clean, or your ride might end up looking like a disco ball!

Common Questions about Car Washing

What is the Correct Order to Wash a Car?

  1. Pre-Rinse: Rinse off the loose dirt.
  2. Wheels First: Clean wheels and tires separately.
  3. Pre-Soak: Pre-soak heavily soiled areas.
  4. Wash: Use the two-bucket method, starting from the top.
  5. Rinse Thoroughly: Rinse all soap off.
  6. Dry: Dry your car with microfiber towels or a chamois.
  7. Detail: Use quick detailer spray for a final shine.
  8. Special Areas: Clean mirrors, emblems, and trim.

Do You Wash the Inside or Outside of a Car First?

Wash the exterior first, because nobody wants to accidentally bring outside dirt into their freshly cleaned car interior. Think of it like this: clean the outside first so you don’t turn your car’s interior into a grimy mess because nobody wants to be that person with a sparkling exterior and a disaster zone inside!

How Cold is Too Cold Outside to Wash Your Car?

When the temperature dips below 32°F (0°C), it’s too cold to wash your car. At this point, water can freeze, turning your car wash into an ice sculpture competition.

How Do I Wash My Car In the Winter?

When washing your car in cold weather, use lukewarm water to keep things from freezing up and causing damage. Skip the hot water, though—sudden temperature changes can make your car’s surface expand or contract like it's auditioning for a circus act. Keep it chill with lukewarm water to avoid turning your wash into an ice capade!

How Hot is Too Hot Outside to Wash Your Car?

When it’s hotter than a pizza oven outside—over 90°F (32°C)—washing your car can turn into a high-stakes game of ‘Will it Dry Before I’m Done?’ Soap might start to dry before you’ve even finished, leaving you with a patchy, streaky mess. Also, watch out for water spots and potential paint damage, because your car’s paint isn’t a fan of getting a sunburn! Aim for the early morning or late evening to avoid turning your car wash into a sun-baked sauna!

How Often Are You Supposed to Wash Your Car?

Aim to wash your car every 2-4 weeks to keep it in top shape. Here’s a quick guide:

  • Every 2 Weeks: If you drive frequently, especially in harsh conditions (like salty roads or lots of dust), washing every 2 weeks helps protect the paint and finish.
  • Every 4 Weeks: If you mostly drive in mild conditions and your car isn’t too dirty, every 4 weeks is usually enough to keep it looking sharp.
  • Seasonal Considerations: In winter, wash more often to remove road salt, while in summer, you might need to wash more frequently to tackle bugs and tree sap.

What is the Best Thing to Wash Your Car With?

Must-have items to wash your car with are:

  • pH-Neutral Car Wash Soap: This special soap is designed to clean your car without stripping away wax or damaging the paint. It’s gentle and effective.
  • Soft Microfiber Mitts: These mitts are great for lifting dirt and grime without scratching the paint. They’re soft and gentle, perfect for a thorough clean.
  • Two-Bucket Method: One bucket for soapy water and one for rinsing. This helps avoid putting dirt back on your car and minimizes scratches.

How Often is Too Often to Wash Your Car?

Washing your car daily or multiple times a week is probably overkill.

Back to Exterior How-To's

Shop the Products