Black On Black Instant Shine
AIR_SPRAY_1
$11.99
$11.99
$14.99
MSRP
Use It With
Black on Black is an instant sprayable dressing in aerosol form that uses an ultra-fine atomizer to spray a thin coat of dressing into hard to reach parts to restore a rich black like-new look.
Use This Dressing To:
- Save time and strain
- Restore a bold new shine
- Turn your tedious detail into 30 second task
- Save your fingers with ultra-fine aerosol mister
- Repel UV rays that fade, discolor, and crack trim
Better Results With Less Work
Spreading dressing by hand can get tedious. The aerosol formula sprayed through the ultra-fine misting atomizer top covers a huge surface area with minimal product. Skip hours of painstaking dressing and finishing: simply spray on the surface, and wipe away excess to your desired shine. Black On Black also mists into the tightest and hardest to reach spots that would otherwise be unreachable.
Rich, New Shine On All Trim
Once Black On Black is applied over the surface, the ultra-refined oils penetrate deep into textured plastic to nourish them to restore a rich new look with glossy shine. This non-greasy dry-to-the-touch formula is also formulated with UV light blockers to help protect trim pieces from the damaging effects of the sun, and keep them looking like new for longer.
- Shake well before using.
- Hold the can 5 - 10 inches from the surface and mist an even coat over any clean and dry plastic car part.
- Leave to air dry for an extra wet shine, or wipe off excess for natural appearance.
- Layer extra coats for extra wet shine.
Time
5 – 15 Minutes
Expertise
Beginner
Prep
Clean Surface
What Else You’ll Need
California Ingredient Disclosure - Cleaning Products Right to Know Act of 2017
| Ingredient INCI Name | Ingredient CAS Number | Ingredient Function | Presence on List of Chemicals of Concern |
| Naphtha | 64742-49-0 | Solvent | EU CMRs |
| Hexane | 110-54-3 | Solvent | ATSDR Neurotoxicants CA Prop 65 CA TACs IRIS Neurotoxicants |
| Butane | 106-97-8 | Propellant | EU CMRs |
| Dimethicone | 63148-62-9 | Lubricant | |
| Propane | 74-98-6 | Propellant | |
| Cyclohexane | 110-82-7 | Solvent | |
| Mineral Oil | 8042-47-5 | Solvent | |
| Solvent Naphtha (Petroleum), Light Aliphatic | 64742-89-8 | Processing Aid | EU CMRs |
| Polymer-Resin | TradeSecretPolymer-Resin | Polymer-Resin | |
| Benzene | 71-43-2 | Propellant | ATSDR Neurotoxicants CA MCLs CA Priority Pollutants CA Prop 65 CA TACs EU Fragrance Allergens IARC Carcinogens US NTP Carcinogens |
| Heptane | 142-82-5 | Solvent | EU Respiratory Sensitizers |
Other Information
Safety Data Sheet (SDS) for this product can be downloaded from our website. Please note that OSHA's Hazard Communication Standard has different disclosure requirements than California's "Cleaning Products Right to Know Act of 2017." Therefore, information listed in Section 3 of the SDS may not exactly match the information in this disclosure.
- UPC: 892936001455
- Applicable Materials: Vinyl Plastic
- Applicable Locations: Exterior
- Product Form: Aerosol
- Shine Preference: Medium
- Weight: 1.0 lbs
- Size: 11oz
Explore More About Dressings
Which Protective Dressing Is Right For My Vehicle?
When it comes to cars, the details matter and just one slip could ruin the look of your whole ride! Your trim may seem like a minor aspect of your detail, but leaving it neglected will stand out like a sore thumb. Cleaning your trim then applying a premium dressing is all it takes to restore your trim, but which dressing is right for you?