Phase 5 Fiberglass Compound and Polish
- Select Options to see Availability
Phase 5 Fiberglass Polish is an all-in-one scratch and swirl remover that cuts away deep swirl marks and scratches, then restores a mirror shine to fiberglass and gel coat finishes in one step.
Use This Polish To:
- Compound and polish in one easy step
- Achieve the highest level of optical clarity
- Save time and money with a one step
- Restore a perfect finish in less time
- Polish in just one pass
Combines Multiple Steps Into One
When fiberglass does get scratched, swirled, and faded from UV solar rays, it needs a tough compound to remove swirls and marks that mar the finish. Phase 5 uses a hybrid abrasive compound to cut away deep swirl marks and scratches, then refine the finish to restore deep gloss, pure reflection, and brilliant shine.
No Fillers For Real Results
When fiberglass does get scratched, swirled, and faded from UV solar rays, it needs a tough compound to remove swirls and marks that mar the finish. Phase 5 uses a hybrid abrasive compound to cut away deep swirl marks and scratches, then refine the finish to restore deep gloss, pure reflection, and brilliant shine without filling in or hiding swirls, scratches, or defects.
Dual Action Polisher
- Shake well and apply 4-5 drops to desired pad.
- Prime pad with Pad Conditioner. Dab product out evenly across 2' x 2' section.
- Turn on machine on paint to speed setting 1 to spread product.
- Increase speed to 5-6 and using moderate pressure, work area in 2-3 passes until product becomes clear.
- Follow with light pressure to finish.
- Remove residue with a clean microfiber towel.
- Please Note: Always try a test spot before use.
Rotary Polisher
- Shake well and apply 4-5 drops to desired pad.
- Prime pad with Pad Conditioner. Dab product out evenly across 2' x 2' section.
- Turn on machine away from paint to a setting in between 1000-1500 rpms to spread product.
- Using just the weight of the machine (no pressure) work area in 3-4 passes until compound becomes clear.
- For final pass adjust speed setting to between 1200-1800 rpms.
- Work until optical clarity is achieved.
- Remove residue with clean microfiber cloth.
Time
1 – 5 Hours
Expertise
Advanced
Prep
Wash Surface, Decontaminate, Wipe Out
California Ingredient Disclosure - Cleaning Products Right to Know Act of 2017
| Ingredient INCI Name | Ingredient CAS Number | Ingredient Category | Ingredient Function |
| Natural Diatomaceous Earth | 61790-53-2 | Intentionally added non-fragrance | Polishing Agent |
| Aluminum Oxide | 1344-28-1 | Intentionally added non-fragrance | Polishing Agent |
| Isoakanes | 68551-19-9 | Intentionally added non-fragrance | Diluent |
Other Information
- Chemicals of Concern:
- Chemicals on CA SB 258 designated list: None
- Fragrance allergen included on Annex III of the EU Cosmetics Regulation No. 1223/2009 as required to be labeled by the EU Detergents Regulation No. 647/2004.: None
- View Material Safety Data Sheet
Safety Data Sheet (SDS) for this product can be downloaded from our website. Please note that OSHA's Hazard Communication Standard has different disclosure requirements than California's "Cleaning Products Right to Know Act of 2017." Therefore, information listed in Section 3 of the SDS may not exactly match the information in this disclosure.
- Applicable Materials: Painted Surfaces
- Car Finishes: Gloss
- Product Form: Cream