The Factory OEM CUT Compound line is finally available for retail
1000-1500 grit sanding scratches with ease leaving a perfect finish
Chemical Guys Cut 1.0 Compound is a premium Acu-Bead compound with
superior finishing ability. 100% Body Shop Safe (silicone & wax free)
our most powerful polishing compound. Factory and Body Shop approved
for scratch removal on newly cured paint as well as old paints. Cut
1.0 is wax/silicone-free, Acu-Bead exact side cutting beads assure a
perfect cutting grade every time with little to no dusting formation.
ALSO AVAILABLE IN 16oz
Cut 1.0 removes (1000-1500) sanding scratches, imperfections, and
swirls perfectly and breaks down into a fine polish for superior
results even without being followed by a polish.
Cut 1.0 Acu-Bead Compound is a Cutting-Compound that rapidly cuts
1000-1500 grit sanding scratches, swirl marks, and imperfection .The
complete line of CUT compounds are developed using the latest Acu-Bead-
technology. This superior compounds breaks down as you use it. CUT
diminishing body shop-safe compound work like a compound then becomes
will remove many moderate to heavy surface imperfections and 1000-1500
grit sand scratches, swirls, scuff marks spider-webbing and most
surface imperfection. As buffing continues its unique Acu-Bead
abrasive system breaks down into finer and finer tiny particles that
eventually becomes a super fine micro-polish.
metamorphosis enables the professional user to compound, polish
delivering a superior finish and protect in one easy step.
Remove scratches, swirl marks, oxidation, spider-webbing, over spray
and most surface imperfections in one easy step.
Benefits of CUT the most advanced compound line:
to assure accurate even, consistent polish over the entire surface.
the fastest and
easiest way to remove moderate scratches and surface imperfections.
works like a
compound, a polish and a cleaner.
removes moderate to
polish that begins working like a compound starting at 1000 grit and
breaking down to 50 center point micro-polish (very thin)
continues the unique abrasive system breaks down to a super fine
well on clear coats
Also available in 16oz Professional size.
Simply click here or on 16oz bottle for more info.
CUT Professional Compound is a professional compound. It is
developed to achieve perfect results with a Rotary, Porter-Cable of
best results use out of direct sunlight. Bright light and direct
sunlight will reflect off of the surface glaring your vision and not
allow for optimal view of scratches and swirls.
a clean terry towel or microfiber applicator pad or towel, apply a
quarter size amount of product
in small areas, applying using a small circular motion.
until dry. Buff away excess product. Repeat as necessary.
- Start by making sure the
surface to be compounded is clean and dry.
- New or fresh paint should be fully
- Apply CUT compound out of direct
sunlight. (it can be used in sunlight, but strong heat is not great
for your head :))
- Use a wool or foam compounding pad,
Lake Country’s CCS Yellow Cutting Pad 8 inch size or for smaller
Chemical Guys 6" MPT Yellow Pads.
- Apply product to pad in an "X"
shape and if needed, use a pad lubricant to assure maximum lubricity.
- With polisher in "off"
position , spread the compound over about a 2 x 2 sq. ft. area.
- Polish at 1200-1800 RPM (5000-6000
OPM with a dual action polisher (Porter Cable)).
- Start by working slowly
across surface, then up and down.
- Always check the progress of your
work to see if blemish or imperfection has been removed.
- If imperfection or blemish is gone,
reduce the pressure of machine and continue buffing til a high gloss
and perfect finish is achieved.
- It may be necessary to switch to a
lighter compound or polish life Pro-Polish.
- If during buffing the pad becomes
dry, spray a little
Buffing pad Conditioner onto it and continue buffing.
- Occasionally wipe the area with a wet
or lightly damp microfiber cloth to better view the results.
- If necessary, follow with
Pro Polish to restore and perfect and finish.
- to protect your final results,
Chemical Guys recommends to always always apply a sealant after
- Chemical Guys recommends
Jetseal Aerospace Paint Sealant for the best level of shine and
polish to dry, then buff to a deep gloss.
Remember for optimal protection and durability, follow all polish
with a wax or paint sealant.
Though CUT compounds will outshine most waxes it does not contain
any waxes, sealants or protective qualities.
optimal protection we suggest