Scratch and Swirl
REMOVER is not a cover-up product, a glaze, a wax or a quick solution.
It is the 100% body shop safe scratch and swirl remover that does just
that REMOVE. Scratch & Swirl Remover is the one step solution
for a variety of paint problems.
Body-Shop Safe Silicone Wax Free=TRUE RESULTS
Acu-Bead-this
superior diminishing body shop-safe product
works like a compound then becomes a polish. Will remove
many moderate to heavy surface imperfections and 1500-1700 grit sand
scratches, swirls, scuff marks spider-webbing and most surface
imperfection. As buffing continues its unique Acu-Bead abrasive system
breaks down into finer and finer tiny particles that eventually become
a super fine micro-polish. This metamorphosis enables the
professional user to compound, polish delivering a superior finish and
protect in one easy step.
Remove scratches, swirl marks, oxidation, spider-webbing, overspray
and most surface imperfections in one easy step with Scratch & Swirl
Buff.
Scratch & Swirl Buff works like a rubbing compound when applied with a
cutting pad or as a finishing polish when applied with a polishing
pad. 100% Wax and Silicone Free, Body shop safe makes Buff ideal for
any job.
Scratch & Swirl Buffs’ advanced formula allows for extend work time
in and out of the sun. Because Scratch and Swirl Buff is
100% Silicone free ultra refined oils are used as lubricants
allowing Scratch and Swirl Buff to work without fillers, waxes, or
silicones to actually remove the blemish or imperfection instead of
covering them up poorly.
Scratch & Swirl Buff, One step cleaner polish.
-
uses ACU-BEAD to assure accurate even, consistent polish
over the entire surface.
-
the fastest and easiest way to remove moderate scratches
and surface imperfections.
-
works like a compound, a polish and a cleaner.
-
removes moderate to heavy scratches
-
eliminates surface imperfections.
-
an aggressive polish that begins working like a compound
starting at 1500 grit and breaking down to 50 center point
micro-polish (very thin)
-
as buffing continues the unique abrasive system breaks
down to a super fine polish.
-
works especially well on clear coats
Note sure you need a whole gallon of the best scratch and swirl
remover ever? We understand simply click here to order a 16oz bottle.
Remember a little goes a long way!
How exactly does Scratch and Swirl Buff Work?
Scratch and swirl Buff uses Acu-Bead meaning that each imported
particle used in the formulation of the product starts off the same
exact size and weight as every other particle. Acu-Beads insure
that the accuracy of cut and polis remains consistent throughout the
polish job. Sure many companies don’t care about accuracy and
use low-quality mixed size graduals in compounds. Chemical Guys
understands that TIME is very important to professionals and body
shops and even more important then time is RESULTS. Consistently
delivering superior results is the name of the game and Scratch and
Swirl Buff is a sure winner.
Scratch and Swill Buff contains millions of tiny Acu-bead abrasives
that gradually break down and diminish under the friction of the pad.
The highly accurate diminishing abrasives break down evenly as they
wear down the sharp edges of the scratch or swirl until light no
longer catches on them, making them disappear without putting
unnecessary wear on the paint that may result from using heavy duty
compounds and thinning the paint.
Used with premium pads or even by hand Acu-bead diminishing abrasives
get smaller and smaller until they become a micro-fine polish that
leaves the paint looking perfect and protected.
Scratch and Swirl Buff works best when applied with a DA, or High
speed polisher, but you may also apply it by hand for gentle
polishing.
Directions:
1.
For
swirls, scratches, and oxidation, start with an orange light cutting
pad on your
UDM Ultimate Detailing machine or
Porter Cable Polisher.
2.
For hard
paint after testing orange pad you may wish to switch to a yellow
cutting pad.
3.
After
swirl removal is complete, use a Blue polishing pad to refine the
surface.
4.
Always
work in small 2’ x 2’ sections to a time.
5.
Always
top polish job with premium glaze, followed by wax or sealant.
