THE
BEST 3 1/2" Backing plate for your Dual Action Polisher. DA-Molded
urethane backing plate. Nothing holds pads better then our Hook & Loop
flexible backing plates.
Chemical Guys Dual-Action Flexible Backing Plates minimize heat
transfer, while it flexes just enough to contour to your autos bends
curves. These backing plates are built tough and even carry a 1 Yr
warrant. Ideal for use with Porter Cable 7424 Dual-Action Polisher or
Chemical Guys Heavy Hitter DA.
Why get a
molder urethane backing plate as apposed to some cheap shit you saw on line?
Urethane is flexible and very durable. Reinforced inner construction
utilizes steel struts molded into the center hub to give the plate stability
while maintaining a great even surface for pads.
Chemical
Guys 3 1/2 " Backing plates Are ideal for use with our complete line of 4" CCS PADS.
|
 |
4" Inch Orange Light
Cutting Pad-This firm, high density foam is ideal for scratch and
defect removal. The orange foam offers the correction of a typical
compounding pad whilst at the same time allowing the polishing ability of
light cut foam pad. When used with heavier compounds it will remove moderate
swirls and scratches with little or no haze. It s an all around pad that
will work on most light to moderate imperfections. |
|
 |
4" Inch Green Heavy Polishing Pad
- This
pad is is used by Mercedes Benz at OEM level and is designed to be used with
a random orbital polisher (like the Porter Cable) It produces less spot
heating and has a unique compression/load/deflection ratio which means it
conforms quickly to contours. It is a high strength foam with 60 pores per
sq. inch yet is softer and more forgiving than our regular foams which have
80 pores per sq. inch.
This pad is tough enough to remove swirls and
scuffs while at the same time producing a high gloss swirl free finish. This
foam is also ideal for applying one-step cleaner waxes. It is a balance of
polishing and finishing that is perfect for all-in-one product application. |
|
 |
4" Inch White Polishing Pad -Less
dense foam formula for the application of waxes, micro-fine polishes and
sealants. This pad has very light cutting power so its perfect for pre-wax
cleaners. It is the most well used pad as it is ideal for application of pre
wax cleansers as well as many finishing polishes such as Pro-Polish Or
FP-Final Polish. |
