Marine and Boat Revive Polish



$19.99 MSRP

Use It With

Marine and Boat Revive Polish cuts through layers of defects, contamination and oxidation to restore and refine your watercrafts finish and restore a high gloss shine.

Use This To: 

  • Restore a brilliant shine
  • Apply by hand or machine
  • Polishes gel coat, fiberglass, and more
  • Remove defects and scratches

Polish Boats, Watercrafts, And More

Every moment boats sit out in the sun, water, salt spray and pollution degrades and oxidizes the finish. Improper washing, drying, and rubbing on the surface scratches and swirls shiny gelcoat and fiberglass, which reduces luster and makes the vessel appear older than it is. Boat Revive Polish removes surface defects and refines the finish to a deep lustrous shine. The special abrasives in Boat Revive Polish start off strong to cut away oxidation and defects, then refines lightly to restore gloss and deep reflection. Boat Revive Polish works great as a one-step polish to remove light to moderate swirls and defects, or as a finishing polish.

Versatile Formula For Fiberglass And Gel coat

Boat Revive Polish uses advanced polishing abrasive technology to remove defects, then refine the finish on any boat or watercraft. The abrasives start strong to remove oxidation, mineral buildup, swirls, scratches, and water spots, then finish lightly to refine deep reflections to a shiny, lustrous, showroom-fresh finish. Use Boat Revive Polish by hand or machine polisher on fiberglass, gelcoat, paint, metal, plastic, or glass on any exterior surface that needs to be polished. Boat Revive Polish is non-toxic and safe for the environment and marine life.

Dual Action Polisher

  1. Shake well and apply 4-5 drops to desired pad. 
  2. Prime pad with Pad Conditioner. Dab product out evenly across 2' x 2' section. 
  3. Turn on machine on paint to speed setting 1 to spread product. 
  4. Increase speed to 5-6 and using moderate pressure, work area in 2-3 passes until product becomes clear.
  5. Follow with light pressure to finish. 
  6. Remove residue with a clean microfiber towel.
  7. Please Note: Always try a test spot before use. 


Rotary Polisher

  1. Shake well and apply 4-5 drops to desired pad. 
  2. Prime pad with Pad Conditioner. Dab product out evenly across 2' x 2' section. 
  3. Turn on machine away from paint to a setting in between 1000-1500 rpms to spread product. 
  4. Using just the weight of the machine (no pressure) work area in 3-4 passes until compound becomes clear.
  5. For final pass adjust speed setting to between 1200-1800 rpms.
  6. Work until optical clarity is achieved.
  7. Remove residue with clean microfiber cloth.


1 – 5 Hours




Wash Surface, Decontaminate, Wipe Out

California Ingredient Disclosure - Cleaning Products Right to Know Act of 2017

Ingredient INCI Name Ingredient CAS Number Ingredient Category Ingredient Function
Natural Diatomaceous Earth 61790-53-2 Intentionally added non-fragrance Polishing Agent
Aluminum Oxide 1344-28-1 Intentionally added non-fragrance Polishing Agent
Isoakanes 68551-19-9 Intentionally added non-fragrance Diluent

Other Information

  • Chemicals of Concern:
    • Chemicals on CA SB 258 designated list: None
    • Fragrance allergen included on Annex III of the EU Cosmetics Regulation No. 1223/2009 as required to be labeled by the EU Detergents Regulation No. 647/2004.: None
  • View Material Safety Data Sheet

Safety Data Sheet (SDS) for this product can be downloaded from our website. Please note that OSHA's Hazard Communication Standard has different disclosure requirements than California's "Cleaning Products Right to Know Act of 2017." Therefore, information listed in Section 3 of the SDS may not exactly match the information in this disclosure.


  • UPC: 811339024540
  • Applicable Materials: Painted Surfaces Glass Clear Plastic
  • Car Finishes: Gloss
  • Product Form: Cream
  • Application Type: Spout
  • Weight: 1.3 lbs