Innovation has long been important to further improve our way of life and simplifying daunting tasks of the past. Wouldnít you want something thatís simpler and much more effective if it were possible? The TORQ Snow Foam Blaster R1 Foam Gun Starter Kit contains every essential tool that any car enthusiast needs to begin detailing in no time. Spread layer after layer of thick foamy suds with ease as it lifts and lubricates grime and contamination right off our your exterior paint. The kit comes equipped with the Chemical Guys Cyclone Dirt Trap and Heavy Duty Detailing Bucket to ensure you remove all abrasive dirt particles from your wash mitt, keeping your paint safe from being reintroduced from the contamination you just removed. By simply scrubbing off the dirt particles on the Cyclone Dirt Trap, all the filth and contamination is trapped underneath without a chance of resurfacing. What total detail would be complete without the soft touch of a Chenille Wash Mitt with 70/30 microfiber blend that is softer than a babyís skin. The final piece of the puzzle is the Chemical Guys Honeydew Snow Foam Auto Wash that contains slick lubricants that pairs well with your wash mitt to help prevent future swirls and scratches without leaving behind any residue. The TORQ Snow Foam Blaster R1 Foam Gun is the most innovative foam gun to maximize the potential of this kit to ensure you the best wash possible.
The ability to create a rich, thick foam is no longer something we wish for, it has become a reality through the innovative breakthrough of the new TORQ Foam Gun. The TORQ Snow Foam Blaster R1 Foam Gun has now raised the bar because of the massive amount of thick foamy suds it creates to lift and lubricate dirt right off of your paint. The only foam gun that puts the detailer in control of the amount of foam they want to use by containing 3 different pressure tips to control how much soap is siphoned through the straw to create the suds. The more soap you pull, the more foam you get. Adding slick car wash soap greatly reduces the risk of installing scratches and swirls. Make life easier by using the TORQ Snow Foam Blaster R1 Foam Gun to ensure yourself of having the best wash possible.
If foam is what the people want, foam is what the people will get! By pairing the TORQ Snow Foam Blaster R1 Foam Gun with the Honeydew Snow Foam Auto Wash, weíve come to the conclusion that one canít have too much of a good thing. Imagine having the thick, slick, foamy suds of the Honeydew Snow Foam being spewed out of the ultra-nozzle of the TORQ Snow Foam Blaster to attack the contamination on your paint. The Honeydew Snow Foam is a pH-balanced soap that makes it safe to be used in direct sunlight without leaving behind any spots or stains. Powerful hyper-surfactants cut through dirt and grime, lift them from sensitive paintwork, then safely lubricate and remove them off without a scratch. The intense level of foam that can be produced from this pairing is astronomical and mind-blowing, but itís a rush knowing you can have this power at the palm of your hands.
If we stick to the theme of perfect pairings, the Heavy Duty Detailing Bucket with the Cyclone Dirt Trap is the last kit youíll ever need. When you match the rugged construction of the Detailing Bucket that is 30% thicker than the competition, with the highly-effective Cyclone Dirt Trap that easily traps dirt particles to ensure you of a scratch-free wash, it becomes nearly impossible to install any accidental scratches or swirls. The Heavy Duty Detailing Bucket is specifically designed to be compact to be able to be stored in a small area to save you valuable space. The Cyclone Dirt Trapís Cyclonic Filtration Technology contains a round wash screen with scores of cyclonic dirt funnels thatís built to net all removed abrasive dirt particles so that they may not rise to your clean filtered water. Donít take a chance by using old mesh filters that attempt to separate dirt from water but always seem to come up short, your paint doesnít deserve that risk.
Use included pressure washer tips to adjust foam thickness
Fill soap solution bottle with water and add 1 - 3 ounces of your favorite Chemical Guys car wash soap. Turn adjustable knob to produce desired foam thickness.
*Feel free to email or call us at 866-822-3670
*Watch any of our highly informative "How to" videos on YouTube
*Take one of DIY or Smart Detailing University Classes and learn about detailing
*Get social with us on Facebook