Rebound Scratch & Swirl Remover restores a mirror shine to motorcycle paintwork in just one step. Swirls, scratches, and marring marks come from poor washing habits, bumps and scrapes, and rough grinding all over the glossy finish. Rebound cuts through the scratches and defects to restore clarity to the reflection, then refines pure gloss and shine. Use Rebound to remove swirls, scratches, and minor paint defects from single stage, clear coat, carbon fiber, glossy plastic fairings, and clear optical plastic windscreens on any type of motorcycle. Chemical Guys Rebound Scratch & Swirl Remover is formulated for fast work time using any dual action or rotary polisher. Rebound is water-based, safe for use in any garage or body shop, and OEM approved to deliver the same polishing results from older 2 or 3 step polishing products. Remove scratches to restore true gloss, shine, and reflection on any motorcycle with Chemical Guys Rebound Scratch & Swirl Remover.
Chemical Guys Rebound is an all-in-one scratch and swirl remover that restores a mirror finish to motorcycles in one step. The advanced polish is blended with diminishing abrasives. This hybrid technology cuts hard to quickly remove swirls, scratches, and oxidation, then breaks down to finish like a fine polish and restore a wet mirror finish. The innovative swirl remover restores a lustrous scratch-free finish permanently without filling in or covering up swirls, scratches, or defects. Rebound Scratch & Swirl Remover restores a clear finish on clear coats, single stage paints, ceramic finishes, carbon fiber, and plastic fairings and windshields. Use Rebound Scratch & Swirl Remover for a mirror finish in one pass.
The revolutionary Rebound Scratch & Swirl Remover can be used on dual-action and rotary polishers for excellent cutting and finishing ability. Rebound works on all painted surfaces with any Hex-Logic foam or Black Optics microfiber buffing pad of choice. Rebound contains no fillers, oils, or silicone that merely mask and cover scratches or other defects. The results you see are the true results you get. Rebound maximizes efficiency by optimizing work time, and delivers perfect results. Rebound Scratch & Swirl Remover is VOC compliant and body-shop safe for any paint shop environment. Remove scratches, swirls, and defects from painted surfaces, plastic fairings, clear plastic windshields, headlights, tail lights, carbon fiber parts, and more. Restore any motorcycle finish back to crystal clarity with Chemical Guys Rebound Scratch & Swirl Remover.
Modern motorcycles are built with a dizzying variety of materials, and they all seem to scratch easily! Every shiny painted surface, glossy plastic, carbon fiber, and metal component will turn dull with scratches, swirls, oxidation, and contamination. Remove these defects to restore gloss and shine with Chemical Guys Rebound Scratch & Swirl Remover. Pair Rebound up with any machine polisher for professional results. Remove scratches caused by leaning on the gas tank, or rubbing the fairings up on plants and gravel. Polish marring marks from carbon fiber fins, cowls, and frame pieces to show off the beautiful weave hidden underneath. Remove tarnish from exhaust pipes, and erase scratches from windshields to restore full optical clarity. The uses go on and on for bikes of all types. Remove scratches, swirls, and other unsightly defects from glossy surfaces on any type of motorcycle with Chemical Guys Rebound Scratch & Swirl Remover.
The Chemical Guys Motorcycle Line of detailing products is designed and blended for use on all types of cycles and quads. Clean, restore, and protect any street bike, racing motorcycle, competition bike, vintage cycle, custom chopper, touring bike, supermoto, motor trike, mini and pocket bikes, motor scooter, offroad dirt bike, quad bike, dual-sport/adventure motorcycle, ATV, and even bicycles with the full lineup of products from Chemical Guys. All cycles operate in similar conditions, and are built with similar materials across the board. The full Chemical Guys Motorcycle Line of products addresses every cleaning and detailing need for all these materials on these machines. Clean, shine, and protect any cycle anywhere with the Chemical Guys Motorcycle Line.
Rebound Scratch & Swirl Remover is also available in a 16 ounce size.
Ready to Use.
*Feel free to email or call us at 866-822-3670 *Watch any of our highly informative "How to" videos on YouTube *Take one of DIY or Smart Detailing University Classes and learn about detailing *Get social with us on Facebook
Work on cool surface. Shake Well. Always work 2’ x 2’ section at a time. Using a polishing pad, work the Rebound Scratch & Swirl Remover into the paintwork to remove swirls, scratches, and oxidation. Remove excess residue using a premium microfiber towel to achieve a brilliant shine. Follow by applying a coat of your favorite Chemical Guys motorcycle wax or sealant.
DA Application:Apply 4-5 drops to desired pad. Prime pad with Chemical Guys Pad Conditioner. Spread on speed setting 1. Set DA machine to speed setting 5-6. Always work 2’ x 2’ section at a time. Using moderate pressure, work area in 2-3 passes until polish becomes clear. Follow with light pressure to finish. Remove residue with a clean microfiber towel. Follow by applying a coat of your favorite Chemical Guys motorcycle wax or sealant.
Rotary Application: Apply 4-5 drops to desired pad. Prime pad with Chemical Guys Pad Conditioner. Set machine 1000-1500 RPMs to spread product. Always work 2’ x 2’ section at a time. Using just the weight of the machine (no pressure) work area in 3-4 passes until polish becomes clear. For final pass adjust speed setting to between 1200-1800 RPMs. Work until optical clarity has been achieved. Remove residue with a clean microfiber towel. Follow by applying a coat of your favorite Chemical Guys motorcycle wax or sealant.