Chemical Guys - Revive Paint Car Polish for Showroom Mirror Finish Shine

Revive glaze and polish high shine wax and sealant

REVIVE GLAZE + POLISH ( 16 oz )

Revive Reshine Rethink

Revive is a rich blend of micro-fine cleaners designed to revive, restore and enhance any automotive finishes. Ideal when following a compound or polish. This fine cleaner-glaze can be used either alone or after compounding. The lustrous gloss obtained with Revive Glaze protects and enhances the natural beauty of any quality paint job as well as removes light oxidation and restores natural paint shine.

Micro Refined cleaning agents gently refine the paint surface and gradually diminish under the friction of the pad. Revive Glaze will not harm the clear coat or contribute to swirls.

Get it done in 1/2 the time with Twice the Shine.

Easy-to-use paint restoring and re-shining Glaze + Polish

Removes those unflattering swirl marks, signs of oxidation, fine scratches, and overspray

Amazing glaze for darker and lighter colors

Enhances gloss and provides lasting protection on any painted surface

Ideal finishing product for any buffing job, it smoothes and brightens the paint eliminating roughness and dullness that may result from use of a polish or swirl removal.

Imagine a Premium Glaze that cleaned and revived paint while maximizing depth and clarity in one pass.....Imagine No More Revive is Here.

Revive Glaze is a fine grade glaze & polish full of lubricating oils and mild diminishing abrasives. The ideal finishing product for any buffing job, it smoothes and brightens the paint eliminating roughness and dullness that may result from use of a polish or swirl removal.

Lubricating Oils enrich the paint enhancing depth, clarity, and reflection to achieve a deep, liquid glass look and shine.

Start:

The first Picture into the left is taken at close zoom to expose the imperfections in the paint.

1 PASS:

The 2nd picture will show you the difference that Revive Made once applied by hand.

2 PASS:

The 3rd picture is what the finish looked like Blue premium glaze and finish pad chemical guys when applied with a Porter Cable Polisher Using a 5.5" HEX-LOGIC BLUE LIGHT CLEANING, GLAZES AND GLOSS ENHANCING PAD

3 PASS:

The 4th picture will show you the crisp clarity of the paint once a machine polish is topped with Jetseal 109 -Paint Sealant.

Micro Refined cleaning agents gently refine the paint surface and gradually diminish under the friction of the pad. Revive Glaze will not harm the clear coat or contribute to swirls.

Use Chemical Guys Revive Glaze after an application of Laser Buff, Spider or and Compound to achieve a perfects finish or simply to amplify the smooth wet shine and perfection of any job.

To extend protection and improve any job, once your done glazing finish the job with M-Seal Paint Sealant.or Jetseal 109

Revive wax paint restoration polish in one

Directions:

Revive Glaze is designed for application by hand or with a dual Action polisher or high speed polisher.
If using a dual action polisher, set the maximum speed between 4500 and 5000 OPM.
If using a circular polisher, do not exceed 1500 RPM. Use a Blue or White HEX LOGIC BUFFING PADS.
Apply small amount of glaze to the pad 3 to 4 dots is enough.
Spread it over about a 2 square foot section with the polisher turned off to avoid splatter.
Turn the polisher on and work the glaze into the paint until the glaze is nearly dry.
Buff off the glaze with a Microfiber buffing towel.
Work in this manner until you’ve glazed the entire vehicle.
Always follow up with M-Seal Paint Sealant or for maximum protection use Jetseal 109 and ideally a nice coat of 5050 Paste Wax to lock in the depth of shine.