The Chemical Guys Light Duty Clay Bar is the gentle solution for turning lightly rough and bumpy paintwork smooth as glass. Choose the Light Duty Clay Bar when working on brand new cars, or garage-kept show cars with very light levels of contamination. Most new cars are shipped via rail at some point, so even brand new cars arrive at the dealership covered in steel particle rail dust. The Chemical Guys Light Duty Clay Bar removes embedded contaminants that ruin shine and destroy paintwork over time. Professional detailers use the Light Duty Clay Bar to pull debris out from the paintwork before it clogs buffing pads, induces extra scratches, and blocks fresh coats of wax from sticking to the surface. This flexible synthetic clay bar conforms to every curve and contour wit Flex-Clay Technology, and easily removes paint overspray, rail dust, brake dust, pollution, and contamination to restore a smooth-as-glass feel. Decontaminate any shiny or clear exterior automotive surface, including paint, clear plastic, glass, and polished metal surfaces with the Light Duty Clay Bar. Chemical Guys constantly innovates, and the newest clay bar formula is engineered to last longer and clean more vehicles than ever before. The Light Duty Clay Bar works great on any glossy paint finish on brand new cars straight from the dealership, or on well-loved garage-kept show cars. Make brand new vehicles feel how and look how they should have in the showroom with the Light Duty Clay Bar.
You would think that a brand new car would be pristine and perfect; it came straight from the factory! Sadly, itís just not the case. Modern paint jobs are applied by precise robots in an automated process, but thereís a lot that happens between the factory spray booth and the showroom floor at the dealership. Some new cars sit on the factory lot for months on end while awaiting shipment. New cars shipped by boat can be contaminated with salt spray and harbor pollution, while new cars shipped on trails face an onslaught of fine steel particles kicked up by train wheels and braking systems. Start caring for your brand new investment with a full decontamination detail with the Light Duty Clay Bar! The Light Duty Clay Bar cleanses the surface by pulling any embedded pollution, fallout, rail dust, brake dust, overspray, and stubborn contamination out from the pores of the surface. If left unchecked, these contaminants can ruin the shine of your brand new car by blocking reflected light, scratch the surface if rubbed around with a towel, and cause the paint to oxidize, tarnish, and peel off the metalwork prematurely. If youíve ever seen a car with paint peeling off the roof, hood, and trunk, know that damage was caused in part by lack of care like clay bar decontamination and wax detailing jobs from day 1. Using the Light Duty Clay Bar can help keep your brand new car looking and feeling brand new for years to come.
Itís time to use the clay bar when your paint does not feel smooth as glass. Any rough feeling is pollution and contamination stuck on the paint, and only the clay bar can remove it safely. Start by washing the vehicle: scrubbing loose dirt on the paintwork turns your clay bar into sandpaper, so avoid tons of swirls and scratches by starting with a clean surface. Use the proper lubricant to glide the clay by smoothly over the surface, and to maintain the integrity of the synthetic clay material. Attempting to clay with soap and water can be too rough on the paint and dissolve the clay bar, so stick to synthetic detail sprays and clay bar lubricants like Clay Luber for the best results. Break off just ⅓ of the clay bar and shape it into a small patty. Use only a small piece because if you drop the clay bar on the ground, you have to throw it away! Once it falls on the ground, the clay bar picks up any small rocks or bits of abrasive dirt and grit, and it is now sandpaper for your paint. Mist a liberal coating of your preferred lubricant over the surface, and gently glide the clay bar to pick up embedded debris. Quickly scrub in short 12Ē passes to fully decontaminate the surface. The clay bar will stick at first, but the rough sounds and stickiness will subside into smooth action as the surface cleans up. Work one panel at a time, and wipe off lubricant residue and buff the panel dry to avoid spotting as you work. Re-knead the clay bar to expose a fresh surface after working 1-2 panels, or whenever the surface looks too dirty to use. Discard the used clay bar once no fresh surface is exposed with kneading. Use the clay bar on any exterior car part that is shiny or clear, including paintwork, glass, clear plastic, polished metals, carbon fiber, and more. Follow the clay bar service with machine polishing to remove any swirl and scratches, then seal the pores of the freshly-cleaned surface with a coat of sealant or wax for durable protection and enhanced shine.
Whatís better: Taking care of a brand new car properly from Day 1, or repainting your car due to the years of neglect and lack of care that left the paint to rot in the sun? Protect your investment from the beginning, and start by decontaminating the paintwork on your new car with the Light Duty Clay Bar. Not only will you make the paint actually feel smooth like brand new car paint, but youíll be removing any contamination that shortens the lifespan of the paintwork and causes extra swirls and scratches with every towel wipe. Using the clay bar prepares the surface for a better finish with wax or sealant. When wax sticks to dirt and pollution, it doesnít last as long or look as good as when it sticks directly to paintwork. Prepare your new car like professionals, and keep it looking and feeling new with the right products and detailing steps. Plus, a car thatís well-maintained and beautiful to look at is worth more than a neglected and dull-looking car when it comes time to sell it. The choice is yours: leave your brand new carís shine up to nature, or protect it from the very beginning with the Light Duty Clay Bar.
*Feel free to email or call us at 866-822-3670
*Watch any of our highly informative "How to" videos on YouTube
*Take one of DIY or Smart Detailing University Classes and learn about detailing
*Get social with us on Facebook