Wipe Out Surface Cleanser Spray (1 Gal)
Why Buy This Product?
- Strips old layers of glaze, sealant, wax, grease, and grime
- Fresh sealant, wax, and vehicle coatings adhere best to stripped surfaces
- Lubricates to prevent swirls and scratches while working
- Remove used polish to inspect paint for remaining swirls and scratches
- Cleans all painted surfaces
- Safe for metal, glass, plastic, rubber, and vinyl
- Easy-to-use sprayable surface prep
- Also available in 4 ounce and 16 ounce sizes
Wipe Out Old Wax Coats
Chemical Guys Wipe-Out is the surface prep spray that strips old layers of glaze, sealant, and wax. Proper surface prep is a critical step in polishing and paint correction, and to guarantee maximum adhesion of fresh layers of vehicle coatings, sealant, and wax. Strip old layers of grease, oil, and polish with Wipe-Out to uncover the totally-pristine surface. Check polishing work to ensure no swirl or scratch was hiding underneath polish residue or old wax. Help your coatings, glaze, sealant, and wax bond stronger, look better, and last longer by properly stripping away old layers with Wipe-Out. While polishing away swirls and scratches, used polish can fill lighter defects and blemishes, making them harder to see and repair. Use Wipe-Out to remove spent polish for proper inspection of paintwork for satisfactory results. The old detailerís trick used IPA (Isopropyl Alcohol) to remove polish residue for painted panels. While the alcohol and water mixture dissolved any residue, it was not slick enough to prevent fresh swirls and scratches caused by light airborne debris or rough microfiber towels. Wipe-Out is formulated with special lubricating and anti-static agents to help prevent scratches while wiping dust or polish residue. Wipe-Out helps prevent polishing residue and dust from sticking to freshly-finished panels for reduced prep time after polishing and before a coat of wax. Prepare your car for the best look and protection with Chemical Guys Wipe-Out Surface Prep Spray.
How It Works
Chemical Guys sealants and waxes bond directly to paint at the nano level. Old sealant and wax residue can still clog the pores of the paint, blocking a durable bond and reducing the effectiveness of your new coating. Chemical Guys Wipe-Out Surface Prep Spray dissolves and strips old wax and sealant layers to expose a totally pristine surface. Old IPA, or Isopropyl Alcohol, solutions dissolved residue, but did nothing to lubricate against scratching with airborne debris or rough towels. Wipe-Out Surface Prep Spray is blended with synthetic wetting agents to help lubricate against fresh damage with every wipe, keeping paintwork pristine and unfettered. Totally-bare surfaces are better prepared for a fresh coating and durable protection. Simply mist Wipe-Out on the surface, wipe clean with a microfiber towel, then buff off any residue. The surface is now totally stripped of any unwanted product and is now ready for a fresh coating of glaze, sealant, or wax. Use Wipe-Out after a clay bar service to remove any fine residue left behind. While polishing, use Wipe-Out to look for leftover swirls hiding behind polish residue. Chemical Guys Wipe-Out is the advanced surface preparation spray for perfectionist-level detailing.
Easy To Use
The advanced chemistry within Chemical Guys Wipe-Out makes it incredibly effective and easy to use. Simply mist it on the surface, then wipe it off. Wipe-Out quickly dissolves and strips old coatings, oil, and grease to reveal a totally pristine surface. Special lubricating agents ensure scratch-free removal of old coatings with premium microfiber towels and proper wipe methods. Anti-static properties repel pollen, dirt, and polishing dust to help keep clean panels free of debris as you finishing a polishing job. The premium spray cleanser will not dry out plastic, rubber, or vinyl surfaces. Use Wipe-Out for final surface prep on your car, truck, motorcycle, or RV for superior protection and excellent results.
Proper Surface Prep For Superior Detailing Results
Sealant and wax adhere best to totally-clean paintwork. Chemical Guys Wipe-Out is a premium surface-cleansing spray that strips paintwork to prepare for a fresh coat of protection. The advanced stripping power of Wipe-Out dissolves old sealant, wax, used polish, oil, and grease to completely expose the surface. During paint correction, used polish can hide unrepaired scratches and swirls. Simply spray Wipe-Out after polishing to remove residue and clearly inspect your work. Wipe-Out prepares the surface before applying fresh glaze, sealant, and wax. Prepare your vehicle for a fresh layer of wax or sealant with Chemical Guys Wipe-Out surface cleansing spray.
This product strips any oil, wax, glaze, and sealant from the surface of the vehicle. If this is not what you intend, do NOT use this product.
Other Sizes Available
Wipe Out is also available in
4 ounce and 16 ounce sizes.