The cutting ability of a compound with the superior finishing ability
of a polish with the unmatched work time of a glaze... all
in one OEM approved Body Shop safe Paint Correction Polish.
Paint Correction Polish System- is capable of removing
light-medium imperfections while delivering
perfect results naturally without filling-in or covering up.
The Entire Paint
Correction System completely replaces compounds. The Paint Correct
line of products cut like compounds, but do so without the heavy grit
abrasive. Utilizing Acu-Cut4 Micro �Size polishing powders � Paint
Correction Polishes deliver a faster more accurate cut that finishes
to perfection like a polish.
Perfect, Professional OEM Results without fillers!
Paint correction 1-2-3 will completely replace any compound and
polish assortment offering amateurs and enthusiasts professional
results with less effort and less time. Paint Correction 1
was designed to follow Paint Correction 2 and virtually any compound
or polish to remove light to moderate swirls, marring and sand
scratches restoring a like new perfect finish. Paint Correction
1 No. 788 replaces fishing compounds, polishes and glazes
delivering a bright, smooth, flawless, perfect finish applied by hand
1-PREMIUM POLISHING SYSTEM- Apply Paint Correct 1 No. 778
Finishing Polish using a White foam finishing pad. Using a rotary
buffer, it is best to work at a speed between 1000-1500 RPM. Using a
dual action polisher, work at a speed of 4 or 5. For optimal results
work in a 2 x 2 sq. ft. area.
Paint Correction 1 No. 778- Super Finishing Polish is the most
accurate final step polish
of removing medium-heavy imperfections when used with a
orange Foam Pad or Fine-Light imperfections when used with a White
Foam Pad. Acu-Cut4
micron-sized polishing abrasives deliver a perfect finish with
less passes, eliminating imperfections and even 1700 grit sanding
scratches, swirls and holograms.
Paint Correction1 Acu-Cut4 micron-sized polishing
abrasives deliver a perfect finish with less passes, eliminating
imperfections and even 1700 grit sanding scratches, swirls and
abuse and wear down paint with strong compounds when you can do it all
in one easy step with a mico-fine super polish? Paint
correction 1 No. 778 delvers the results profession OEM user and
detailers have been asking for for years.
The Entire Paint Correction System
completely replaces compounds. The Paint Correct line of products
cut like compounds, but do so without the heavy grit abrasives.
Utilizing Acu0Cut4 Micro Size polishing powders Paint
Correction Polishes deliver a faster more accurate cut that
finishes to perfection like a polish.
Swirled, scratched, and badly beat up.
|50/50- If perfection is what you're looking
for, nothing will tell it like it is better than a 50/50 side by
side of your before and after...the best part is it is shot at
once. This beautifully detailed Red BMW M3 was submitted by
master detailer Eric Turano. using Chemical Guys Hex Logic 6.5"
White Pad and Only Paint Correction 1 the results are clear to
& Scratches on side fender
Driver side fender after polishing w/Orange Hex
Logic Pad & Paint Correction 1
Remove scratches, swirl marks, oxidation, spider-webbing, overspray
and most surface imperfections in one easy step with paint Correction
1 (No. 778)
Benefits of Paint Correction Polishes- the most advanced compound line:
Acu-Cut4 micron-sized polishing abrasives deliver a perfect finish
with less passes
for buffing dull and oxidizes headlights.
the fastest and
easiest way to remove moderate scratches and surface imperfections.
works like a
compound, a polish and a cleaner in one.
removes moderate to
extended work time
well on clear coats
Paint Correction Polishes are engineered
developed to achieve perfect results with a Rotary, Porter-Cable of
best results use out of direct sunlight. Bright light and direct
sunlight will reflect off of the surface glaring your vision and not
allow for optimal view of scratches and swirls.
a clean terry towel or microfiber applicator pad or towel, apply a
quarter size amount of product
in small areas, applying using a small circular motion.
until dry. Buff away excess product. Repeat as necessary.
- Start by making sure the
surface to be compounded is clean and dry.
- New or fresh paint should be fully
- Work Paint Correction 2
out of direct sunlight. (it can
be used in sunlight, but strong heat is not great for your head :))
- Use a Orange Cutting pad like
Chemical Guys Hex Logic 5.5, 6.5 or 7.5 inch pad.
Paint Correction Can also be used with a variety of other pads.
- For Lighter polishing work and
finishing work you can use the White Polishing Pad.
- Apply product to pad in an "X"
shape and if needed use a pad lubricant to assure maximum lubricity
- With polisher in "off"
position , spread the compound over about a 2 x 2 sq. ft. area.
- Polish at 1200-1800 RPM (5000-6000
OPM with a dual action polisher (Porter Cable)).
- Start by working slowly
across surface, then up and down.
- Always check the progress of your
work to see if blemish or imperfection has been removed.
- If imperfection or blemish is gone,
reduce the pressure of machine and continue buffing to a high gloss
and perfect finish is achieved.
- It may be necessary to switch to
Paint Correction 1 (No. 788)
- If during buffing the pad becomes
dry, spray a little
Buffing pad Conditioner onto it and continue buffing.
- Occasional wipe the area with a wet
or lightly damp microfiber cloth. to better view the results.
- If necessary, follow with Paint
Correction 1 (No. 788) to restore and perfect and finish.
- to protect your final results
Chemical Guys recommends to always always apply a sealant after
- Chemical Guys recommends
Jetseal Aerospace Paint Sealant for the best level of shine and
polish to dry, then buff to a deep gloss.
Remember for optimal protection and durability, follow all polish
with a wax or paint sealant.
Though CUT compounds will outshine most waxes it does not contain
any waxes, sealants or protective qualities.
optimal protection we suggest