The cutting ability of a compound with the superior finishing ability
of a polish with the unmatched work time of a glaze... all
in one OEM approved Body Shop safe Paint Correction Polish.
Paint Correction 2 -Premium
Paint Correction Polish System- is capable of removing
medium-heavy imperfections while delivering
perfect results naturally without filling-in or covering up.
The Entire Paint
Correction System completely replaces compounds. The Paint Correct
line of products cut like compounds, but do so without the heavy grit
abrasive. Utilizing Acu-Cut4 Micro Size polishing powders � Paint
Correction Polishes deliver a faster more accurate cut that finishes
to perfection like a polish.
Paint Correction 2-PREMIUM POLISHING SYSTEM- is capable
of removing medium-heavy imperfections while delivering perfect
results naturally without filling-in or covering up. Acu-Cut4
micron-sized polishing abrasives deliver a perfect finish with
less passes, eliminating imperfections and even 1200 grit sanding
scratches, swirls and holograms.
Paint Correction 2 Acu-Cut4 micron-sized polishing
abrasives deliver a perfect finish with less passes, eliminating
imperfections and even 1200 grit sanding scratches, swirls and
The Entire Paint Correction System
completely replaces compounds. The Paint Correct line of products
cut like compounds, but do so without the heavy grit abrasives.
Utilizing Acu0Cut4 Micro �Size polishing powders � Paint
Correction Polishes deliver a faster more accurate cut that
finishes to perfection like a polish.
|50/50- If perfection is what you're looking
for, nothing will tell it like it is better than a 50/50 side by
side of your before and after...the best part is it is shot at
once. This beautifully detailed Porsche was submitted by
master detailer Eric Turano. using Chemical Guys Hex Logic 6.5"
orange Pad and Only Paint Correction 2 the results are clear to
Swirls on passenger side intake
Passenger side intake duct after polishing with White Hex
Logic Pad & Paint Correction 2
Remove scratches, swirl marks, oxidation, spider-webbing, over spray
and most surface imperfections in one easy step with paint Correction
2 (No. 721)
Benefits of Paint Correction Polishes- the most advanced compound line:
Acu-Cut4 micron-sized polishing abrasives deliver a perfect finish
with less passes
for buffing dull and oxidizes headlights.
The fastest and
easiest way to remove moderate scratches and surface imperfections.
Works like a
compound, a polish and a cleaner in one.
Removes moderate to
Extended work time
well on clear coats
Paint Correction Polishes are engineered
developed to achieve perfect results with a Rotary, Porter-Cable of
best results use out of direct sunlight. Bright light and direct
sunlight will reflect off of the surface glaring your vision and not
allow for optimal view of scratches and swirls.
a clean terry towel or microfiber applicator pad or towel, apply a
quarter size amount of product
in small areas, applying using a small circular motion.
until dry. Buff away excess product. Repeat as necessary.
- Start by making sure the
surface to be compounded is clean and dry.
- New or fresh paint should be fully
- Work Paint Correction 2
out of direct sunlight. (it can
be used in sunlight, but strong heat is not great for your head :))
- Use a Orange Cutting pad like
Chemical Guys Hex Logic 5.5, 6.5 or 7.5 inch pad.
Paint Correction Can also be used with a variety of other pads.
- For lighter polishing work and
finishing work you can use the White Polishing Pad.
- Apply product to pad in an "X"
shape and if needed use a pad lubricant to assure maximum lubricity
- With polisher in "off"
position , spread the compound over about a 2 x 2 sq. ft. area.
- Polish at 1200-1800 RPM (5000-6000
OPM) with a dual action polisher (Porter Cable).
- Start by working slowly
across surface, then up and down.
- Always check the progress of your
work to see if blemish or imperfection has been removed.
- If imperfection or blemish is gone,
reduce the pressure of machine and continue buffing to a high gloss
and perfect finish is achieved.
- It may be necessary to switch to
Paint Correction 1 (No. 778)
- If during buffing the pad becomes
dry, spray a little
Buffing pad Conditioner onto it and continue buffing.
- Occasional wipe the area with a wet
or lightly damp microfiber cloth. to better view the results.
- If necessary, follow with Paint
Correction 1 (No. 778) to restore and perfect and finish.
- to protect your final results
Chemical Guys recommends to always always apply a sealant after
- Chemical Guys recommends
Jetseal Aerospace Paint Sealant for the best level of shine and
polish to dry, then buff to a deep gloss.
Remember for optimal protection and durability, follow all polish
with a wax or paint sealant.
Though CUT compounds will outshine most waxes it does not contain
any waxes, sealants or protective qualities.
optimal protection we suggest