The cutting ability of a compound with the superior finishing ability of a polish with the unmatched work time of a glaze... all in one OEM approved Body Shop safe Paint Correction Polish.

Paint Correction 3 -Intense Cut -Premium Paint Correction Polish System- is capable of  removing Heavy-Extreme imperfections while delivering perfect results naturally without filling-in or covering up. 

The Entire Paint Correction System completely replaces compounds. The Paint Correct line of products cut like compounds, but do so without the heavy grit abrasive.  Utilizing Acu-Cut4 Micro Size polishing powders Paint Correction Polishes deliver a faster more accurate cut that finishes to perfection like a polish.

The finest true finish available. No. 700  is the first water based OEM approved Paint Correction Polishing Compound capable of rapidly and evenly removing heavy imperfections while delivering perfect results naturally without filling-in or covering up.  Acu-Cut5 micro- sized abrasives deliver a perfect finish with less passes, eliminating imperfections and even 1000 grit sanding scratches, swirls and holograms. No. 700  Paint Correct delivers a perfect  finish with  fewer passes and less wear on the paint. Perfect

Professional Factory results can finally be achieved fast and easy utilizing ACU- CUT5 micro sized polishing abrasives, the first polishing abrasive designed to function without oils, silicones or fillers.  No.700 allows for more work time without drying, maximizes efficiency delivering perfect OEM results.No.700 VOC compliant and body-shop safe for any paint shop environment.

		Paint Correction 3-Intense Cut PREMIUM POLISHING SYSTEM-  is capable of  removing heavy-extreme imperfections while delivering perfect results naturally without filling-in or covering up.  Acu-Cut5 micron-sized polishing abrasives deliver a perfect finish with less passes, eliminating imperfections and even 800-1100 grit sanding scratches, swirls and holograms.

Pass #2 w/ CG Paint Correction 3(No. 700) under rear passenger side window (left side unpolished, right side polished): Paint Correction 3  Acu-Cut5 micron-sized polishing abrasives deliver a perfect finish with less passes, eliminating imperfections and even 800 grit sanding scratches, swirls and holograms. Perfect  Professional Factory results can finally be achieved fast and easy utilizing ACU -CUT5 micro sized polishing abrasives, the first polishing abrasive designed to function without oils, silicones or fillers.  No.700 allows for more work time without drying,  maximizes efficiency delivering perfect OEM results.No.700 VOC compliant and  body-shop safe for any paint shop environment.

Pass #2 w/ CG Paint Correction 3(No. 700) under rear passenger side window (left side unpolished, right side polished):

50/50- If perfection is what you're looking for, nothing will tell it like it is better than a 50/50 side by side of your before and after...the best part is it is shot at once.  This beautifully detailed Gun Metal Gray M3 was submitted by master detailer Eric Turano. using Chemical Guys  Paint Correction 3 & Hex Logic 6.5" orange Pad and Only Paint Correction 3 the results are clear to see.
Swirls on passenger side intake duct	Passenger side intake duct after polishing with White Hex Logic Pad & Paint Correction 2

Remove scratches, swirl marks, oxidation, spider-webbing, overspray and most surface imperfections in one easy step with paint Correction 3 (No. 700)

 Benefits of Paint Correction Polishes- the most advanced compound line:

• Acu-Cut 5 micron-sized polishing abrasives deliver a perfect finish with less passes
• Ideal for buffing dull and oxidizes headlights.
• The fastest and easiest way to remove moderate scratches and  surface imperfections.
• Works like a compound, a polish and a cleaner in one.
• Removes moderate to heavy scratches
• Eliminates surface imperfections.
• Extended work time without drying.
• No-powder formula
• Works especially well on clear coats

Paint Correction Polishes are engineered developed to achieve perfect results with a Rotary, Porter-Cable of Flex machine.

 

Hand Application

1. For best results use out of direct sunlight.  Bright light and direct sunlight will reflect off of the surface glaring your vision and not allow for optimal view of scratches and swirls.

2. Using a clean terry towel or microfiber applicator pad or towel, apply a quarter size amount of product

3. Work in small areas, applying using a small circular motion.

4. Rub until dry. Buff away excess product. Repeat as necessary.
    

Machine Application:

1. Start by making  sure the surface to be compounded is clean and dry.
2. New or fresh paint should be fully cured.
3. Work Paint Correction 3 (No.700)  out of direct sunlight. (it can be used in sunlight, but strong heat is not great for your head :))
4. Use a Orange or YellowCutting pad like Chemical Guys Hex Logic 5.5, 6.5 or 7.5 inch pad.
5.  Paint Correction Can also be used with a variety of other pads. 
6. For Lighter polishing work and finishing work you can use the White Polishing Pad.
7. Apply product to pad in an "X" shape and if needed use a pad lubricant to assure maximum lubricity if needed.
8. With polisher in  "off" position , spread the compound over about a 2 x 2 sq. ft. area.
9. Polish at 1200-1800 RPM (5000-6000 OPM with a dual action polisher (Porter Cable)).
10. Start by  working slowly across surface, then up and down.
11. Always check the progress of your work to see if blemish or imperfection has been removed.
12. If imperfection or blemish is gone,  reduce the pressure of machine and continue buffing to a high gloss and perfect finish is achieved.
13. It may be necessary to switch to Paint Correction 1 (No. 788)
14. If during buffing the pad becomes dry, spray a little Buffing pad Conditioner onto it and continue buffing.
15. Occasional wipe the area with a wet or lightly damp microfiber cloth. to better view the results.
16. If necessary, follow with Paint Correction 1 (No. 788)  to restore and perfect and finish.
17. to protect your final results Chemical Guys recommends to always always apply a sealant after compounding.
18. Chemical Guys recommends Jetseal Aerospace Paint Sealant for the best level of shine and protection.

Allow polish to dry, then buff to a deep gloss.

After Polish:

1. Remember for optimal protection and durability,   follow all polish with a wax or paint sealant.

2. Though CUT compounds will outshine most waxes it does not contain any waxes, sealants or protective qualities.

3. For optimal protection we suggest Jetseal.