3 inch Flex Pro Professional Backing Plate with Drill & DA
Adapters. Molded urethane backing plate. Nothing holds pads
better than our Hook & Loop flexible backing plates.
Flexible Backing Plates minimize heat transfer, while it flexes just
enough to contour to your autos bends curves. These backing plates are
built tough and even carry a 1 Yr warranty.
3” x 1/2” Mini Hook & Loop Backing Plate is ideal for use with 3,3,5
and 4 inch pads.
The Flex Pro 3” inch backing plate comes with both a drill
attachments (¼” shank fits most drills) that enables you to use it
with most any drill of your choice and Porter Cable or DA adapter
The Chemical Guys Flex Pro Backing Plate and adapter kit is
a unique and versatile backing plate with interchangeable
adapters; one makes the plate a drill chuck backing plate
and the other makes it a pneumatic backing plate.
Why get a molder urethane backing plate as opposed to some cheap backing plate
you saw on line? Urethane is flexible and very durable. Reinforced inner
construction utilizes steel struts molded into the center hub to give the plate
stability while maintaining a great even surface for pads.
The Flex Pro backing plate is smaller than the pads to allow
a generous lip of foam to protect the paint surface. Even if
you turn the pad onto its side accidentally, there is an
inch of soft, beveled urethane between the edge of the plate
and the inner construction. The threaded post fits any
polisher with a 5/16” diameter and the shaft adapter enables
it to work great with any buffer or drill.
Use the backing plate preferred by some of the leading car
manufacturers in the world to put the final touches on their
vehicles. Our Flex Pro Backing Plate provides the safest,
most durable surface for your pads so that you get the best
performance possible from you pads.
Directions / Use:
3” x 1/2” Mini Hook & Loop Backing Plate is ideal for use with 3,3,5 and 4 inch
pads. The Flex Pro 3” inch backing plate comes with both a drill attachments
(¼” shank fits most drills) that enables you to use it with most any drill of
your choice and Porter Cable or DA adapter (standard 5/16”).
*Feel free to email or call us at 310.674.8135 or 310.678.2838*Come to one of our showrooms and talk with a knowledgeable product specialists*Watch any of our highly informative "How to" videos on YouTube*Take one of DIY or Smart Detailing University Classes about "How to Detail"*Get social with us on Facebook
14108 S. Western AveGardena, CA 90249
1103 S. Harbor BlvdSanta Ana, CA 92704