|
 |
5 1/4" Inch Yellow Cutting Pad
-Use this pad to apply compounds or polishes to remove severe oxidation,
swirls, and scratches in conjunction with a polishing compound. It is the
most aggressive and should only be used on oxidized and older finishes.
Always follow this pad with an orange pad and a fine polish and then a white
pad to refine the paint until it is smooth. |
|
 |
5 1/4" Inch Orange Light
Cutting Pad-This firm, high density foam is ideal for scratch and
defect removal. The orange foam offers the correction of a typical
compounding pad whilst at the same time allowing the polishing ability of
light cut foam pad. When used with heavier compounds it will remove moderate
swirls and scratches with little or no haze. It s an all around pad that
will work on most light to moderate imperfections. |
|
 |
5 1/4" Inch Green Heavy Polishing Pad
- This
pad is is used by Mercedes Benz at OEM level and is designed to be used with
a random orbital polisher (like the Porter Cable) It produces less spot
heating and has a unique compression/load/deflection ratio which means it
conforms quickly to contours. It is a high strength foam with 60 pores per
sq. inch yet is softer and more forgiving than our regular foams which have
80 pores per sq. inch.
This pad is tough enough to remove swirls and
scuffs while at the same time producing a high gloss swirl free finish. This
foam is also ideal for applying one-step cleaner waxes. It is a balance of
polishing and finishing that is perfect for all-in-one product application. |
|
 |
5 1/4" Inch White Polishing Pad -Less
dense foam formula for the application of waxes, micro-fine polishes and
sealants. This pad has very light cutting power so its perfect for pre-wax
cleaners. It is the most well used pad as it is ideal for application of pre
wax cleansers as well as many finishing polishes such as Pro-Polish Or
FP-Final Polish. |
|
 |
5 1/4" Inch Black Finishing
Foam -Composition is firm enough to withstand added pressure during
final finishing to remove buffer swirls. It has no cut and will apply thin,
even coats of waxes, sealants, and glazes. |
|
 |
5 1/4" Inch Blue Ultra Fine Finishing Pad - This
pad has a ultra soft composition for applying glaze, finishing polish,
sealants, and liquid waxes. Flat pad provides full contact with paint
surface to minimize the pressure applied by the user. |
 |
THE BEST 5" Backing plate for your Dual Action Polisher.
DA-Molded urethane backing plate. Nothing holds pads
better then our Hook & Loop flexible backing plates.
Dual-Action Flexible Backing Plates minimize heat transfer, while it
flexes just enough to contour to your autos bends curves. These backing
plates are built tough and even carry a 1 Yr warrant. Ideal for use with
Porter Cable 7424 Dual-Action Polisher or Chemical Guys Heavy Hitter DA. |
